Back to search page

RDES20200722001

Spanish company is looking for partners to apply to Eurostars to further develop a non-conventional alternator

RESEARCH PROFILE   REQUEST   ADD TO FAVOURITES
PRINT

 

ABSTRACT

A Spanish start-up expert in the development of ground-breaking systems for wind energy generation is looking for partners expert in kinetic and mechanical energy conversion into electricity to further develop a non-conventional alternator. The main objective is to introduce improvements in the current alternator to increase its efficiency and maximize electricity generation. The partnership sough is a research cooperation agreement to participate in Eurostars.


FULL DESCRIPTION

The main objective of the project is to produce a wind turbine that generates energy based on the phenomenon called vortex shedding that operates at market-competitive yields and scalable.

The company has focussed in the development of a system to harness wind energy based on this phenomenon, and has experience in EU funded projects (winner of a SME instrument phase 2 and other international and national prizes).

The result of the company research and prototyping and field tests is a ground-breaking turbine without blades, formed by a few parts without gears, noiseless when operating, and with a low impact on environment, in particular on bird's population according to a study developed by a relevant environmental organization.

The design of the device is performed using simulations in collaboration with partners with expertise in fluids dynamics modelling and tailored applications, and partners with supercomputing capacities.

The technology developed so far is capable to produce clean energy from low speed winds based on the interaction of the wind and the device (geometrical design patented). The vortices created induce the oscillation of the device in a controlled manner based on the aerostatic resonance phenomena (system patented), movement that is eventually transformed into electricity (alternators under patents). The system is designed to include parts without gears, reducing the operational and maintenance works and costs.

The devices can be used connected to the grid or as a stand-alone system able to generate energy in isolated environments and in urban areas. The device is capable to provide energy for self-consumption and combined with solar panels (in particular photovoltaic systems) could meet the load demands in a reliable manner.

But the main aim of the project is to develop an alternator with a better performance. The alternator developed so far for the device adapts with its natural frequency of oscillation to resonate with the vortex shedding frequencies within a wide range of wind speeds. It is based on a magnetic confinement system with permanent magnets that increase the apparent stiffness of the system according to its oscillation amplitude and the degree of core bending. The oscillation amplitude increases as the wind intensifies. This is named “the tuning system” (patented) able to capture energy from a cut-in point of approx. 3 m/s (starting wind speed). This achieves the variation of the apparent stiffness of the structure that can be "tuned" to the incident wind speed, to remain in resonance without any mechanical or manual interference. This greatly increases the lock-in range of the wind turbine (working range).

The current design of the alternator is not performing at the desire level. The company is looking for partners with the expertise that allow them to move forward. The company is interested in implementing improvements to the non-conventional alternator with the aim to increase its performance. The main outcome of the R&D project shall be a solution, different from conventional alternators, able to increase the efficiency of the current alternator in the conversion of energy into electricity.

In particular, the company is looking for a technological partner with the capacity to provide knowledge and means for the definition, testing and manufacturing of the new alternator. The ultimate aim is to produce a wind turbine market competitively and scalable with several applications.

The company is interested in a research cooperation agreement to apply to the Eurostars programme, desirable with a 2 years project.

Deadline for the Call: February 2021
Deadline for the EOIs: February 2021


Partner expertise sought:

- Type of partner sought: The specific working conditions of an alternator on a blade free machine require different characteristics compared with conventional alternators.

The general objectives are to improve the specific power of the current development and to reduce costs.

Although it is not essential, given the radial symmetry of the machine operation, the development of iron parts by 3D printing with geometries and discontinuities that minimize eddy currents is optional.

The current evolution of this electromechanical system is based on a small alternator of about 100W nominal power with permanent magnets, and without brushes or shafts. As usual, the moving part of the alternator contains neodymium magnets and laminated electric iron.

However, in addition to the usual copper and laminated iron, the stator also includes permanent magnets with two goals:
1. To bring the magnetic conductors close to magnetic saturation when the machine is in neutral position.
2. To produce magnetic repulsive forces between the stator and the moving part of the alternator which follow a specific angular evolution.

This is an alternator that operates at very low frequencies, with equivalent values below 50Hz.
Air gaps should be limited to values less than 1mm and apparently no thermal or dissipation challenges will be solved.

The optimisation and improvement in performance of the alternator is strongly linked to the fluid-structure interaction of the machine. Given the complexity and costs of computer simulations, the test of results should be done experimentally in both, wind tunnels and under real environment working conditions (prototyping).

One of the most important tasks will be oriented to the detailed definition of the system. Thus, the development will take into account the assembly of the alternator and the materials used, and the manufacturing and industrialization of the device with a performance as close as possible to the theoretical one.

The intellectual property may be shared with regard to processes, industrial and manufacturing methods.
The project could include the introduction of relevant (even general) modifications to the current concept of the alternator.
- Specific area of activity of the partner: The company is looking for a partner (industrial or academy) with a wide expertise in kinetic and mechanical energy conversion into electricity capable to develop innovative alternators. The outcomes expected from the collaboration is an improved alternator to be incorporated into the device ready to market. The partnership sought is a research cooperation agreement to apply to the Eurostars programme with the same objective, to improve the efficiency of the alternators.


Advantages & innovations:

The main outcome of the project is a wind turbine that generates clean energy, low costs, with low maintenance and operational costs and harmless to birds populations.

The device that operates at low wind speeds does not need of specific orientations.

Due to its geometry (without blades), the devices can be installed nearby each other’s, increasing energy yield production in a given surface, also making the device suitable to be place in built-up areas.

As the noise when operates is residual, can be integrated at a wide range of environments (urban, peri-urban, rural, remote locations).


Development Stage:

Field tested/evaluated


IPR:

Design Rights

Programme - Call:

Website: https://www.eurostars-eureka.eu/

Deadline: 28/03/2021

Coordinator required: No

Sign-in or create an account

To express an interest in this profile, you must first sign in or create a new account.

If you already have an account, sign in here

Not got an account yet, sign up here

KEY INFORMATION

Country of origin
SPAIN
Profile date
25/08/2020
Deadline
02/02/2021

PARTNERSHIP(S) SOUGHT

Research cooperation agreement

CLASSIFICATIONS

INDUSTRY SECTORS
Building and Construction \ Materials \ Energy \ Engineering \ Renewables
TECHNOLOGY KEYWORDS
INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT / Design and Modelling / Prototypes / 3D printing / INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT / Materials Technology / Adhesives / INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT / Materials Technology / Composite materials / OTHER INDUSTRIAL TECHNOLOGIES / Apparatus Engineering / ENERGY / Renewable Sources of Energy / Wind energy
COMMERCIAL KEYWORDS
none...
MARKET KEYWORDS
ENERGY / Alternative Energy / Wind energy / ENERGY / Energy Supply and Retail / Energy for private/domestic housing / ENERGY / Energy Supply and Retail / Energy for the community/public sector / ENERGY / Energy Supply and Retail / Energy for Industry

FIND OUT MORE

Contact Enterprise Europe Network Scotland by email at info@enterprise-europe-scotland.com, quoting reference number RDES20200722001